Product description:
The sensor module is sensitive to the environment temperature, its USES thermistor sensor for temperature detection, module in the environment temperature is less than set threshold, output high level DO end, when the environment temperature more than set threshold, output DO low level, the working voltage of 3. 3 V to 5 V. The sensor of the induction temperature can be regulated by potentiometer. Thermistor module is sensitive to the environment temperature, generally used to detect the temperature of the surrounding environment changes, or MCU trigger relay module, etc. The DO output can be directly driven our relay module, which can form a temperature control switch.
Product performance:
1.. when the environment temperature reach setting threshold, output high level DO end, when
The environment temperature more than set threshold, output DO low level. detection
Temperature can be adjusted through the potentiometer, clockwise adjust potentiometer, temperature detection
Increased; Counter-clockwise adjust potentiometer, detect temperature decrease.
2. The comparator output, signal clean, good waveform, driving ability.
3. The sensor module output port OUT can be directly connected to the microcontroller IO port namely
But, also can drive a 5 v relay directly; Connection mode: the VCC -
VCC. GND - GND; The OUT - IO
4, can use 3. 3 V to 5 V dc power to power supply module. When the power supply switch on
When the red power indicator light;
5, the module of temperature detection range of 20-80 degrees Celsius;
6, this module can also be replaced with a line of temperature sensor, used for water temperature,
The control of water tank, etc.
Jelenlegi ára: 500 Ft
Az aukció vége: 2021-10-29 09:29 .
0 megjegyzés:
Megjegyzés küldése